BETEX® Hydraulic Power! Professional hydraulics for industrial use
BETEX ®HYDRAULIC POWER! Is a growing range of high pressure workshop hydraulic equipment, developed by Bega Special Tools. Ideal for performing a wide variety of maintenance jobs in your workshop or production area. The products are produced and tested according to international standards (ISO 9001-2008). The maximum operating pressure is 700 bar standard.
The piston is easy to operate using the hand pump. While operating the press, operation can be switched from hand pump to foot pump.
Unique! You have a choice of two different piston speeds: as soon as the rapidly lowering piston detects counter pressure, it will automatically switch back to a lower speed.
Advantages / applications
Safe and easy dismounting of bearings, couplings, rings, etc.
Advantages of unique self-centering pullers:
For professional removal of parallel keys
With the BETEX KZZ, you can easily remove keys from shafts of motors, pumps and all kinds of other applications in drive technology. For keys up to a width of 35 mm.
Safe!
Hammer and chisel are no longer needed.
Advantages
Simple, handy 2-arm puller for external grip. Suitable for dismantling pulleys, bearings, rings and fans of electric motors. During dismantling, the arms cannot slip because they are pressed against the puller bridge. The greater the pressing force, the tighter the arms grip on the workpiece!
These pullers are also available with extended arms for even greater capacity.
Simple, handy 2/3-arm puller for parts gripped externally like pulleys, bearings, rings, etc. Suitable for removing fans from electric motors. During operation, the arms cannot slip because they are pressed against the cross bar. The harder the pulling force, the tighter the jaws grip around the workpiece. These pullers are also available with extended arms for even larger capacity.
This 2-arm puller is extremely well-suited to applications involving the extraction of bearings, rings, sprockets, couplings etc. The jaws are forged and therefor extra strong. Reversal of the arms makes internal dismantling also possible. The self-locking system guarantees that the arms will not deflect.
These bearing pullers are particularly suitable for extracting bearings, bearing rings, gears, discs etc. for tight or difficult to reach areas. First lateral force is applied to grip the part with the sharp jaws. These grip on the radius of the outer ring. Due to the special construction, the arms cannot move during use. You prevent damage and save time.
This puller is particularly suitable for extracting bearings, pinions, pulleys etc. for tight or difficult to reach areas.
The 2/3 arms of these pullers adjust themselves simultaneously and symmetrically, inwards, or outwards. Work efficient with perfect positioning of the arms. The arms cannot bend or deflect. The higher the pulling force, the tighter the grip of the arms.
These pullers are also available with extended arms for even larger capacity.
These four-arm bearing puller have been specially developed to extract ball-bearings from casings and shafts simultaneously. For when there is no free space internally or externally. The arms grip the bearing between the inner- and outer ring. For extra grip and the desired leverage effect, a supplied ring can be used. The blue numbered bearings are dismantled without the ring.
Used for the 6000, 6200, 6300 and 6400 bearing series.
This special expander system has been developed to facilitate rapid and effective dismantling under difficult conditions, e.g., in 'blind holes'. The multiple adjustable jaws (up to 6) ensure the correct grip from behind the bearing. Deflection is impossible. The counter supports are universal, which means that the arms can be twisted in any direction to find the best point of pressure.
The larger types are equipped with a conical puller adapter in the expander, which prevents friction when tightening the screw. Bearings, bushings, seal rings etc. are extracted effortlessly.
BETEX MP60/MP65 are constructed for the dismounting of hard-to-reach bearings and other parts, where there is insufficient space for grip with a puller. Suitable for multiple applications.
Shaft protector sets for shaft centers and hollow shafts.
Designed to protect shaft centres from distortion when extreme pressures are applied. Inserted between the shaft and puller spindle.
There are 2 types, 625 for shaft centre protection and 630 for hollow shafts.
Using these protectors prevents damage to the centre hole and the spindle.
This auxiliary tool is used to increase pressure for stuck parts. The hydraulic mini press is placed between the shaft and the spindle. It administers a 5 mm stroke; max pressing capacity is 8 tons. The impact loosens the stuck workpiece. This prevents overloading and wear on the spindels.
Compact pullers with integrated pump and cylinder
for dismounting components such as bearings, bushings, wheels, couplings and pulleys
Advantages of unique self-centering pullers:
Compact pullers with integrated pump and cylinder
for dismounting components such as bearings, bushings, wheels, couplings and pulleys
Advantages of unique self-centering pullers:
Safe and user-friendly dismounting of bearings, couplings, rings, etc.
Advantages of unique self-centering pullers:
Hydraulic jaw puller set
The complete set includes:
BETEX HPP Push Puller: three-in-one tool, self-centering
This unique patented self-centering design provides end users with a three-in-one tool to easily and safely fit or remove bearings and sleeves using either their outer or inner edges.
The push puller is specially designed for combined pushing and pulling. This creates one tool that uses even force to enable very easy pushing and pulling.
The pushing jaw fits on the bearing’s inner ring, preventing the transmission of forces and/or heat through the outer ring to the moving parts, minimizing the risk of bearing damage.
User- Friendly
ETEX Bearing splitters
This accessory set consists of:
The Tri-Section Pulling Plates BETEX STP-3 are specially designed for 3-arm (hydraulic) pullers.
The unique and patented design creates maximum spread and applies even force. The Tri- Section Plate can be mounted behind the inner and outer bearing ring. This prevents the pulling force from being transmitted through the moving parts, so the bearing is not damaged.
Advantages
Small size induction heaters for use in workshops and on location. Safe, clean and controlled heating, no open flames.
Betex iDuctors: the ultimate precision heating tool to loosen stuck parts. (nuts, bolts, bearings). All sorts of metal parts, such as transmission parts, bearing housings, bolts, nuts, pipes and small surfaces can be heated locally. Thanks to the precise heating, the surroundings retain a normal temperature. As a result, stuck parts will expand and loosen, rust and sealants dissolve. Also suitable for removing decals and coating layers. No secondary damage!
recision heating, the ultimate tool for flameless heating!
The BETEX iDuctor is a professional type of induction hand tool. All sorts of metal parts, such as transmission parts, bearing housings, bolts, nuts, pipes and small surfaces can be heated locally. Thanks to the precise heating, the surroundings retain a normal temperature. As a result, stuck parts will expand and loosen. Also suitable for removing decals and coating layers.
BETEX iDuctor 1 - 1200W
This is an ideal solution for stuck nuts, bolts, etc., where often a conventional blow torch or grinder is used. Using a blow torch with open flames entails some form of risk and may cause pollution. A grinder can spark and cause damage to the area surrounding the part. Workplaces become safer, cleaner and more efficient with the BETEX iDuctor 1.
AdvantagesPrecision heating, the ultimate tool for flameless heating!
The BETEX iDuctor is a professional type of induction hand tool. All sorts of metal parts, such as transmission parts, bearing housings, bolts, nuts, pipes and small surfaces can be heated locally. Thanks to the precise heating, the surroundings retain a normal temperature. As a result, stuck parts will expand and loosen. Also suitable for removing decals and coating layers.
BETEX iDuctor 2 - 2300W
The only induction hand tool on the market with an output of no less than 2300 Watts. Using the BETEX iDuctor 2 you can heat larger and heavier workpieces even faster. No open flames. Considerable time savings.
Advantages
With 4.0 technology ... Induction heating is a superior, fast and controlled heating method. It is a safe and environmentally-friendly alternative to traditional heating methods such as ovens, oil baths or blow torches. These methods generate smoke, fumes or oil waste and are hazardous for your personal safety and a healthy working environment. It is common knowledge that a correct mounting method extends the bearing life. Controlled stress-free heating prevents unnecessary damage, while retaining the original bearing lubrication. Ideal for sealed bearings (2RS-ZZ). Bearing manufacturers recommend controlled induction heating as the best practice for bearing mounting.
The new BASIC and SMART 4.0 generation
BASIC: replaces part of the standard BETEX workbench models, which have been updated in terms of design and electronics.
SMART: for optimal control over the heating process. These models have a modern, easy-to-use touchscreen, 2 temperature sensors for double measurement (Delta T), log function, to store or export information.
Dimensions bearing: |
|
Min. inside diameter Ø |
10 mm |
Max. outside diameter Ø |
240 mm |
Max. width |
120 mm |
Max. weight |
20 kg |
- Portable induction heater
- Ideal for use in workshopt or on-site
Dimensions bearing: |
|
Min. inside diameter Ø |
-- |
Max. outside diameter Ø |
180 mm |
Max. width |
-- |
Max. weight |
10 kg |
Very easy to use and is suitable for bearings, gear wheels, couplings with a max. OD of 180mm.
Since you need no yokes even odd shaped parts can be heated. Simply place on the surface, place the temperature probe, select temperature and press start.
Dimensions bearing: |
|
Min. inside diameter Ø, vertical/horizontal |
10/65 mm |
Max. outside diameter Ø |
400 mm |
Max. width |
120 mm |
Max. weight |
50 kg |
- Portable induction heater
- Easy to use
Dimensions bearing: |
|
Min. inside diameter Ø, vertical/horizontal |
30/72 mm |
Max. outside diameter Ø |
500 mm |
Max. width |
180 mm |
Max. weight |
100 kg |
- Benchtop model with swivel arm
- Easy to use
Dimensions bearing: |
|
Min. inside diameter Ø, vertical/horizontal |
45/110 mm |
Max. outside diameter Ø |
600 mm |
Max. width |
210 mm |
Max. weight |
150 kg |
- Benchtop model with swivel arm
- Easy to use
Dimensions bearing: |
|
Min. inside diameter Ø, vertical/horizontal |
45/110 mm |
Max. outside diameter Ø |
600 mm |
Max. width |
210 mm |
Max. weight |
200 kg |
Dimensions bearing: |
|
Min. inside diameter Ø, vertical/horizontal |
10/65 mm |
Max. outside diameter Ø |
400 mm |
Max. width |
120 mm |
Max. weight |
50 kg |
The SMARTserie is used when more control over the heating process is needed. These have a modern easy-to-use touchscreen and 2 temperature probes for dual temperature sensing (Delta T)
Dimensions bearing: |
|
Min. inside diameter Ø, vertical/horizontal |
30/72 mm |
Max. outside diameter Ø |
500 mm |
Max. width |
180 mm |
Max. weight |
100 kg |
The SMARTserie is used when more control over the heating process is needed. These have a modern easy-to-use touchscreen and 2 temperature probes for dual temperature sensing (Delta T)
Dimensions bearing: |
|
Min. inside diameter Ø, vertical/horizontal |
45/110 mm |
Max. outside diameter Ø |
600 mm |
Max. width |
210 mm |
Max. weight |
150 kg |
The SMARTserie is used when more control over the heating process is needed. These models have a modern easy-to-use touchscreen and 2 temperature probes for dual temperature sensing (Delta T)
Dimensions bearing: |
|
Min. inside diameter Ø, vertical/horizontal |
45/110 mm |
Max. outside diameter Ø |
600 mm |
Max. width |
210 mm |
Max. weight |
200 kg |
The SMARTserie is used when more control over the heating process is needed.
These models have a modern easy-to-use touchscreen and 2 temperature probes for dual temperature sensing (Delta T)
Induction heating is a superior, fast and controlled heating method.
It is a safe and environmentally friendly alternative for traditional heating methods such as ovens, oil baths or blow torches. These methods cause smoke, fumes or oil waste and are hazardous for personal health and safety.
Bega induction bearing heaters are versatile and are used for safe heating of bearings (NU, NJ) gear wheels, bushings, couplings, innerrings, labyrinth rings, train wheels etc. etc. It is common knowledge that a correct mounting method extends bearing life. Controlled induction heating prevents unnecessary damage, and retains original pre-lubrication. Induction heaters are ideal for sealed bearings (2RS-ZZ).
Dimensions bearing: |
|
Min. inside diameter Ø |
30/135 mm |
Max. outside diameter Ø |
850 mm |
Max. width |
320 mm |
Max. weight |
400 kg |
Dimensions bearing: |
|
Min. inside diameter Ø |
60/150 mm |
Max. outside diameter Ø |
1050 mm |
Max. width |
400 mm |
Max. weight |
600 kg |
Dimensions bearing: |
|
Min. inside diameter Ø |
260/60 mm |
Max. outside diameter Ø |
1150 mm |
Max. width |
430 mm |
Max. weight |
800 kg |
Dimensions bearing: |
|
Min. inside diameter Ø |
330/90 mm |
Max. outside diameter Ø |
1700 mm |
Max. width |
710 mm |
Max. weight |
1600 kg |
Dimensions bearing: |
|
Min. inside diameter Ø |
30/135 mm |
Max. outside diameter Ø |
850 mm |
Max. width |
320 mm |
Max. weight |
400 kg |
Dimensions bearing: |
|
Min. inside diameter Ø |
60/150 mm |
Max. outside diameter Ø |
1050 mm |
Max. width |
400 mm |
Max. weight |
600 kg |
Dimensions bearing: |
|
Min. inside diameter Ø |
260/60 mm |
Max. outside diameter Ø |
1150 mm |
Max. width |
430 mm |
Max. weight |
800 kg |
Dimensions bearing: |
|
Min. inside diameter Ø |
330/90 mm |
Max. outside diameter Ø |
1700 mm |
Max. width |
710 mm |
Max. weight |
1600 kg |
The smart and eco-friendly way of heating - for dismounting and mounting of all sorts of transmission components
Application examples:
The smart and eco-friendly way of heating - for dismounting and mounting of all sorts of transmission components
Application examples:
Fixed inductors for removing, labyrinth rings, sleeves, etc.. Fixed inductors are used for serial work
SMART inductor recognition
When a fixed inductor is connected to the generator for a second time, it will automatically select the correct settings. All you have to do is press START.
Which inductor?
For tension free heating we offer fixed or flexible inductors. This depends on work piece application.
Request our product questionnaire for proper advice.
Min. winding diameter flexible inductors 3.5 kW
Bearing assembly using heat and shrink fitting is still the safe alternative for hammers, gas burners or oil baths. Correct mounting is essential to maximize the bearing life cycle. The BETEX Cone Heater is a relatively inexpensive and very user-friendly heater, suitable for different diameters. A great solution for small workshops.
A correct mounting method extends bearing life. Electric heating is a safe alternative to traditional methods such as hammering, oil baths or even blow torches!
Also suitable for heating gears, bushes, cogwheels, couplings and other round metal workpieces.
The affordable alternative!
If your budget is limited then the BETEX Cone Heater is an affordable alternative to other heating systems. It is easy to use and suitable for a variety of sizes. The aluminium body is light weight and ensures fast, even heating.
Advantages CHU:
A correct mounting method extends bearing life. Electric heating is a safe alternative to traditional methods such as hammering, oil baths or even blow torches!
Also suitable for heating gears, bushes, cogwheels, couplings and other round metal workpieces.
The affordable alternative!
If your budget is limited then the BETEX Cone Heater is an affordable alternative to other heating systems. It is easy to use and suitable for a variety of sizes. The aluminium body is light weight and ensures fast even heating.
Advantages CHC:
Fitting tool set
Cold mounting, or mechanical mounting for small and medium sized bearings. For safe, precise and quick mounting of bearings, bushings, sealing rings etc., the Impact fitting tool set is an absolute must-have.
Specially for bearings it is important that during mechanical mounting the bearing is supported on its inner and outer ring in order to avoid unnecessary damage and premature failure.
Your benefits:
The software runs on a tablet, or phone, guiding the user through the entire alignment process. The user interface is entirely graphical and uses no text, no language barriers to overcome. The software leaves you without any doubt how your machine is aligned and when your job is completed. Reporting is automatic and contains all relevant information.
Advantages:
Advantages:
The LASER-SMARTY3 is an extremely affordable and universally applicable disc and pulley alignment system for the alignment of V-belts, toothed belts, flat belts and chain drives.
The LASER-SMARTY3 is applicable to both magnetic and non-magnetic discs. It has two magnetic aligning blocks with offset control to allow, if necessary, thickness differences of the pulley discs. This allows you to measure the parallel and angular errors between both pulleys directly in relation to the belt position in the groove. The magnetic straighteners and device can be mounted within seconds. A visible laser appears on the target blocks. If the laser line shines exactly through the slots of the target blocks, the discs are aligned. The result is a fast and accurate alignment.
The PAT pulley alignment laser is the definitive solution for all your pulley alignment jobs!
Because the belts' grooves are used as reference points, you can see instantly whether the pulleys are correctly aligned or not.
The PAT is supplied with two spring-loaded laser units that can be mounted in the pulley groovesThe PAT also has standard tapers allowing the lasers to be mounted on most standard gauges.(A-E 6 mm - 40 mm)
The use of two laser units makes it very easy for the user to determine the adjustment required, e.g. whether to correct a parallel error or an angular error.
You can see in no time whether your pulleys are correctly aligned. Alignment is just as easy as mounting the laser units. Simply switch on the lasers and view the laser unit on the other pulley.
The laser projects a line on the upper surface of the opposing laser unit, mounted on the 'target' as shown to the left. If required, the machine can be aligned in such a way that the laser on both units hits the 'target'.
D90 BTA is compact and light. Suitable for most types of drive, such as V-belt, timing belt, flat belt and chain drives.
Wireless and digital system for precise and efficient alignment of sheaves/pulleys, belts, bearings and seals.The advantages:
BETEX 1240 infrared thermometer upto 800°C
perma® Automatic lubricators offers exceptional solutions for hard-to-reach places, extreme conditions such as high / low temperatures, high loads, dust and dirt. Perma-tec is a European product, with European certifications and actively contributes to YOUR work safety.
perma prevents up to 55 % of roller bearing failures
perma reduces costs by up to 25 %
Bega is Preferred Distributor: Bega Special Tools is Perma-tec's largest stockholding Distributor in Europe! Perma-tec GmbH & Co.KG has been working with Bega for more than 25 years. Bega employees are regularly trained in Germany and the Netherlands to follow the latest developments in both lubrication and applications.
perma ULTRA
High pressure lubrication system with a wide temperature range and bluetooth communication.
Your advantages: